The Second Generation Zigbee
Zg2531 (CC2531) Development kit
This is idea for the electronic hobbyist
or Small Consulting Company wishing to rush into the HOTTEST Zigbee Technology
field.
The kit includes:
1. USB SmartRF05-Lite BDM for CC25xx/CC24xx/CC11xx X2
2. Zg2531 (CC2531) Module X2
A. Description for The Second Generation Zigbee Zg2531 (CC2531)
Module
Features:
1.Dimentions: 15mm X 22mm (CC2531) , 30mm X 36mm (Adaptor for Zg2531) (optional)
2.Supports Software:
TI's IAR for cc2530/2531 (evaluation version),
TI's SmartRF Studio, You can use our module without programming.
TI's SmartRF05 Flash Programmer
3. Elec. documents for the development.
4. Working on 2.4Ghz ISM banding
5. 15-mm 24-mm Industry-eve Package
6. Zigbee technology Compatible
7. Embedded high-gain antenna with extern antenna adaptor
8. Accurate Digital Received Signal-Strength Indicator (RSSI)
9. Suitable for Systems Targeting Compliance With Worldwide Radio Frequency
Regulations: ETSI EN 300 328 and EN 300 440 Cass 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
10. Low Power:
Active Mode RX Down to 19.6 mA
Active Mode TX (6 dBm): 24 mA
Power Mode 1 (3- Wake-Up): 235
Power Mode 2 (Seep Timer On): 0.9
Power Mode 3 (External Interrupts): 0.4
11. Microcontroller
High-Performance and low-Power 8051 Microcontroller Core
In-System-Programmable Flash, 256 KB
8-KB SRAM
Peripherals
12-Bit ADC with Eight Channels and Configurable Resolution
Integrated High-Performance Op-Amp and Ultra-Power Comparator
Genera-Purpose Timers (One 16-Bit, Two 8-Bit)
21 Genera-Purpose I/O Pins (194 mA, 220 mA)
32-kHz Seep Timer With Capture
Two Powerful USARTs With Support for Several Serial Protocols
IR Generation Circuitry
Powerful Five-Channel DMA
AES Security Coprocessor
Battery Monitor and Temperature Sensor
12. Each CC2531 Contains a Unique 48-bit IEEE Address
13. Fu-Speed USB Interface
14. Rohs Compatible
15. Gold plated for reliable connection and higher-performance
19.Transmission range: 30 meters / 100 feet, but that can vary greatly depending on temperature, humidity and air.
/font>
B. Description for USB Debugger for CC2540/CC2530/CC2431/CC2430/CC2511
(SmartRF05EB)
Used
to evaluate the Bluetooth BT2540 and Ti's Zigbee
products. Use SmartRF Studio to perform RF measurements. The radio can be
easily configured to measure sensitivity, output power, and other RF parameters.
Features:
1. USB Interface
2. work with CC2540, CC2541, CC2530, CC2531, CC2430, CC2431, CC2511 etc... chips
3. work with IAR for 8051 software as well as all the following software.
4. a. SmartRF Studio 7,
b. SmartRF Flash Programmer,
c. IAR Embedded Workbench for 8051
5. Dimensions: 70mm X 25mm
* * Wholesale
or OEM are welcome * * sales@rfidgeek.com