.

4 AXIS (TB6560) CNC STEP MOTOR DRIVER

$129.90

? 4 AXIS CNC STEP MOTOR DRIVER 's features:

  • HUGE improvements from TA8435 based boards **
  • Resolution: Full step, 1/2, 1/8,1/16 selectable via switch for each axis.
  • Absolute maximum ratings: 40VDC @ 3.5 amps(peak)/phase motor output per axis *
  • PC parallel port DB25 connector has being installed onboard.
  • Adjustable motor current at 100%, 75%, 50%, 20% of full current by on-board switch
  • Supports different 4 Wire, 6 Wire and 8 Wire stepper motors for 3 axis drive.
  • Built-in overheat protection circuit in TB6560
  • This board is tested through KCAM, Mach 2/3, touborCNC CNC software.
  • This board has been used in different design 3D engrave machines, millers, routers.
  • Double Buffer for Interface and Driver for reliable Driving and? protecting Computer and driver board.
  • 1KV, 10 Mbps high speed Optocoupler for full elimination to protect Computer and driver board.
  • Step Current(r) Technology included: Step Current technology is used to decrease the current upto 1/2, when motors are in idle for all axis so as to protect expensive step motor and driver board for long time running.

? * See TB6560 Datasheet by TOSHIBA. The full current is preset at 2.5A by resisters for this board (you can adjust it by changing them).
???? **Comparison between TA7835 (used in Univelop V1.0 CNC driver) and TB6560 (used in V2.0 CNC driver board):

/td>

V 1.0 (TA7835)

V 2.0 (TB6560)

IC Overheat protection

N/A

Built-in

Current Adjustable

100%/50%

100%/75%/50%/20%

Current for motor

Peak 2.5A

Peak 3.5A [*]

Voltage for motor

Max 35V

Max 40V [*]

Micro stepping

1 1/8

1 1/16

Frequency (fOSC)

Max 80kh

Max 600khz

/td>

/td>

/td>

This auction provides you :

  • ?One 5-axis CNC Interface Board
  • Four 1-Axis CNC driver boards
  • 4 Connection cables
  • a Manual.

We also provide additional 1-axis driver board, interface board, cables for extension of our 5 axis driver boards, and other components.

Document:



Add to Cart:

  • Model: CNC5AIXS4TB6560
  • Shipping Weight: 0.8lbs
  • 5 Units in Stock


Copyright © 2006-2014 CNC Geeker (Univelop Tech. LLC). Powered by CNC Geeker, Univelop Tech. LLC
PCBBeek the cheap professional PCB prototype