This is ideal for the electronic hobbyist or Small Consulting Company wishing to rush into the HOTTEST ZigBee field.

A. The kit consists of all necessary software and hardware for testing/prototype.
   Kit includes: 
      2 x USB Debugger for CC2431/CC2430/CC2511
      2 x 2.4Ghz ZigBee/ IEEE 802.15.4 CC2431 Module
      1 x CDROM includes all software and manual
   Include Software:
        1. TI's IAR IDE programming environment for CC2430/2431 (evaluation version),
        2. TI/ChipCon's SmartRF Studio,  You can use our module without programming.
        3. TI/ChipCon's SmartRF04 Flash Programmer
        4. TI/ChipCon's Pocket Sniffer,
        5. TI/ChipCon's IEEE Address Programmer
        6. Elec. documents for the development.

B. Description for USB Debugger for CC2431/CC2430/CC2511
    Used to evaluate the Z31/Z31E products.  Use SmartRF® Studio to perform RF measurements. The radio can be easily configured to measure sensitivity, output power, and other RF parameters.
    Features:
    1. USB Interface
    2. work with CC2430, CC2431, CC2511 etc... chips
    3. work with IAR ew8051 software as well as all the above software.
    4. Provide 2 LEDs and 1 button for Zigbee Module usage
    5.dimensions: 52mm X 36mm 

C. Description for Zigbee CC2431/CC2430 Module (Z31)
Features:
   1.Dimentions: 29mm X 30mm (cc2431) , 33mm X 30mm (cc2431+cc2591) (optional)
   2.Supports Software:
       TI's IAR for cc2430/2431 (evaluation version),
       TI/ChipCon's SmartRF Studio,  You can use our module without programming.
       TI/ChipCon's SmartRF04 Flash Programmer
       TI/ChipCon's Pocket Sniffer,
       TI/ChipCon's IEEE Address Programmer
   3. Elec. documents for the development.
   4. Antenna: High performance chip antenna, We use large chip antenna for better performance.
   5. 2.4 GHz IEEE 802.15.4 / ZigBee(TM)
   6. Location Engine (CC2431) calculates the location of a node in a network
   7. High performance and low power 8051 microcontroller core
   9. Low current consumption (RX: 27mA, TX: 27mA, microcontroller running at 32 MHz)
   10. 128-bit AES security coprocessor
   11. ADC with up to eight inputs and configurable resolution
   12. Only 0.5µA current consumption in power-down mode, where external interrupts or the RTC can wake up the system
For CC2591(optional)
   13. Up to 22-dBm Output Power (12.5times than the power of cc2431)
   14.  6-dB Typical Improved Sensitivity on CC24xx and CC2500, CC2510, and CC2511
   14. Flash/RAM: 128kb/8kb
   15. Operating Voltage(Min)(V): 2 (Max)(V): 3.6
   16. TX Power(dBm): 0 (cc2431 only), 22 dbm (cc2431 + cc2591)
   17. Sensitivity (Best)(dBm): -92 (cc2431 only), -98 (cc2431 + cc2591)
   18. Data Rate(Max)(kbps): 250
   19. Transmission range: 50 meters / 300 feet (without CC2591) 200m/1200 feet (with CC2591)(optional), but that can vary greatly depending on temperature, humidity and air.
　

* * Wholesale or OEM are welcome * * sales@zbee.biz